Hello and welcome!

On 1 July 2021 there will be an EU regulation on what VAT you have to pay when buying online.

In order for you to see the correct VAT, we have automatically retrieved information about which country you are in. Change it if it was wrong or if you want to show the VAT of another country.

The correct VAT will be automatically shown at the checkout regardless of which country you choose here.

We have used your IP number (3.235.179.79) or if you have approved location services, to find the information. This information is only used to show the correct VAT on the products and is then used at checkout.

Country:


Two planes in one. Use it as a bullnose plane or remove the toe piece for chisel configuration by loosening the brass locking knob.
An adjustable set screw in the toe acts as a stop to accurately set the mouth opening. It also allows perfect repositioning of the toe when switching between configurations.
Stress-relieved ductile cast iron body and toe are accurately machined and ground so that the sole and sides are flat and square.
The adjustable toe allows the mouth to be narrowed for very fine shavings with minimum tear-out.
Comfortable in the hand.
A low bed angle of 15°, combined with the 25° blade bevel, results in a cutting angle of 40° for exceptional end-grain performance.
Set screws along the side allow for accurate positioning of the blade as well as reinstallation without lateral adjustment.
Blade is 1/8" thick, made of either A2 or O1 tool steel. It is lapped on the non-bevel side to a flatness tolerance of 0.0002" or better over the working surface, and with an average roughness surface finish of 5 microinches (0.000005") or better.
Body is 4-3/4" long by 1" wide.

Weighs just over 1-1/4 lb.

Patented.

Instruktion

Write a review

Note: HTML is not translated!
    Bad           Good

Bullnose Plane, PM-V11

  • Brand: Veritas tools
  • Product Code: 05P42.71
  • Availability: Out of stock
  • 1,963.75kr (SEK)

  • Ex Tax: 1,571.00kr (SEK)

Tags: Bullnose Plane, PM-V11, 05P42.71, Shoulderplanes