Hello and welcome!

On 1 July 2021 there will be an EU regulation on what VAT you have to pay when buying online.

In order for you to see the correct VAT, we have automatically retrieved information about which country you are in. Please change it if it was wrong. This information is only used to show the correct VAT on the products.

The correct VAT will automatically be shown at the checkout regardless of the country you choose here.

We have used your IP number ( for this check.


  The knob and wheel have elegant elliptical knurled edges for a firm grip.
The lever cap has been extensively redesigned to integrate cleanly with the plane body and provide an almost continuous hand-contact surface with tactile cues for finger placement.
The Norris-type adjuster mechanism combines feed and lateral adjustments, making blade setting accurate and easy.
Close manufacturing tolerances reduce backlash to no more than 1/4 turn.
The adjuster is locked to the body and will not become inadvertently unseated.
Mouth adjustment is effected by loosening the stainless-steel locking knob.
An unobtrusive set screw in the plane throat allows repeatable mouth positioning while at the same time preventing the moveable toe from contacting the blade.
The toe is completely enclosed by the body casting.
The contoured body is 7" long by 1-3/4" wide and has a 12° bed angle. It is machined and surface ground to half our normal flatness and surface finish specifications; the sole and sides are flat and square to within +0.000" and
-0.0015" over the entire surface.
The A2 tool steel blade is 1-3/8" wide, 9/64" (0.140") thick and hardened to Rc60-62. The blade has a primary bevel of 23° and a secondary bevel of 25°. The back of the blade is lapped flat within + or -0.0002" (two-tenths of a thousandth of an inch) in the working area of the blade.
Made from our regular ductile iron, has a die-cast lever cap and is finished with a durable powder-coat polymer paint.


Write a review

Note: HTML is not translated!
    Bad           Good

DX60 Block Plane

  • Brand: Veritas tools
  • Product Code: 05P70.01
  • Availability: Out of stock
  • 2,046.25kr (SEK)

  • Ex Tax: 1,637.00kr (SEK)

Tags: dx60 block plane, 05p70.01, veritas tools, block planes, veritas planes