Hello and welcome!

On 1 July 2021 there will be an EU regulation on what VAT you have to pay when buying online.

In order for you to see the correct VAT, we have automatically retrieved information about which country you are in. Please change it if it was wrong. This information is only used to show the correct VAT on the products.

The correct VAT will automatically be shown at the checkout regardless of the country you choose here.

We have used your IP number ( for this check.


Using the same quick-release
mechanism as our tail vise, our
front vise has a simple on-off cam
lever to engage or disengage the Acmethreaded
screw, allowing it to apply up to 400 lb of
force in either clamping or spreading applications. The screw mechanism
provides 121/4Й of overall travel (less the thickness of your
wooden jaw and bench apron). Tight body tolerances result in
minimal jaw sag, even at full extension. An extruded aluminum screw
cover keeps debris out of the screw mechanism and prevents the
workpiece from contacting the lubricated screw. Straightforward to
install in new construction or as a retrofit to an existing bench, the vise
requires an unobstructed mounting area on the underside of the bench
top at least 12Й wide by 16Й deep (with a 2Й thick bench apron and a
13/4Й thick jaw). The body is ductile iron with zinc-alloy endplates,
steel shafts and guide rods, and a maple handle. Mounting instructions
and hardware included. Made in Canada. Patent pending.

Write a review

Note: HTML is not translated!
    Bad           Good

Framtång för hyvelbänk

  • Brand: Veritas tools
  • Product Code: 05G34.01
  • Availability: In Stock
  • 4,085.00kr (SEK)

  • Ex Tax: 3,268.00kr (SEK)

Tags: framtang foer hyvelbaenk, 05g34.01, veritas tools, woodworking vises