Trade work top jig for up to 700mm worktops.|Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. |Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps.|Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm wide worktops. |Cuts up to 40mm thick worktops with or without anti-drip postformed edge.|Three open-ended bolt recesses (dog bone style) for 150mm bolts. |Engraved lines for short 65mm bolts and worktop cross-cut.|10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up.|Engraved markings for identification of pin holes.|Pins made from ABS plastic for strength.|Jig requires:|A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.|A template guide bush with 30mm outside diameter ref. GB30.|A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.|Two clamps.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Kitchen Worktop Jig 700mm

  • Brand: Trend UK
  • Product Code: KWJ700
  • Availability: In Stock
  • 1,735.23kr (SEK)

  • Ex Tax: 1,388.18kr (SEK)
  • Price in reward points: 6

Related Products

Universal Sub-base with pins and bush
Model: UNIBASE

Universal Sub-base with pins and bush

The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide..

320.57kr (SEK) Ex Tax: 256.46kr (SEK)

Template cabinet door hinge 35 & 26mm
Model: TEMP/CDH/A

Template cabinet door hinge 35 & 26mm

A routing template that allows a router to create a 26mm or 35mm diameter blind hole recess for a ci..

961.53kr (SEK) Ex Tax: 769.22kr (SEK)

Aperture Radius Jig
Model: AR/JIG

Aperture Radius Jig

A jig to rout out apertures, recesses and radii in work tops to fit a range of sinks and hobs, and t..

1,427.50kr (SEK) Ex Tax: 1,142.00kr (SEK)

Belfast sink  jig
Model: BS/JIG

Belfast sink jig

For routing Belfast /Butler sinks.|Made from 12mm hardwearing CNC machined phenolic.|Will also allow..

1,583.75kr (SEK) Ex Tax: 1,267.00kr (SEK)

Tags: Kitchen Worktop Jig 700mm, KWJ700,