Hello and welcome!

On 1 July 2021 there will be an EU regulation on what VAT you have to pay when buying online.

In order for you to see the correct VAT, we have automatically retrieved information about which country you are in. Please change it if it was wrong. This information is only used to show the correct VAT on the products.

The correct VAT will automatically be shown at the checkout regardless of the country you choose here.

We have used your IP number (3.236.214.224) for this check.

Country:


This is a Hishika Kugihiki saws!

It features a hand made saw blade hardened one at a time by hand as has been done traditionally in Japan for centuries. The whole blade is hardened for flexibility as well as hardness. The blade thickness tapers towards the back to produce friction-free strokes and the teeth are sharpened with no set to produce the cleanest cuts.

Kugihiki saws are intended for flush cutting of pins and similar applications, and have a cross-cut tooth configuration. The blades are quite fragile and should not be used in applications that might over-stess them, such as cuts that are more than about a half inch in depth, except in very thin stock. Because of the way that the blade is tempered, it will break if too much stress is put on the blade. This is only an issue if the saw is used in a way for which it was never intended.

Write a review

Note: HTML is not translated!
    Bad           Good

Kugihiki Saw 180mm

  • 461.25kr (SEK)

  • Ex Tax: 369.00kr (SEK)

Related Products

Kugihiki Saw 120mm

Kugihiki Saw 120mm

Kugihiki saw 120mm, 0.4mm bladefor flush cutting..

251.25kr (SEK) Ex Tax: 201.00kr (SEK)

Tags: Kugihiki Saw 180mm, HI-180KU, Japanese saws