Hello and welcome!

On 1 July 2021 there will be an EU regulation on what VAT you have to pay when buying online.

In order for you to see the correct VAT, we have automatically retrieved information about which country you are in. Please change it if it was wrong. This information is only used to show the correct VAT on the products.

The correct VAT will automatically be shown at the checkout regardless of the country you choose here.

We have used your IP number ( for this check.


Lie Nielsen Bevel Edge Chisel 5/8 inch

A2 chisels - these will hold their edge longer than high carbon chisels and therefore require less frequent sharpening.

The chisel edges are square, parallel along the length, and very narrow so you can get into tight places. The backs are ground flat and finished by hand at 400 grit. The bevel is flat ground at 30°, but a higher secondary bevel (about 35°) is advisable, depending on the wood and how the chisel is being used. Additional honing is recommended.


Write a review

Note: HTML is not translated!
    Bad           Good

Lie Nielsen Bevel Edge Chisel 5/8 inch

  • 673.75kr (SEK)

  • Ex Tax: 539.00kr (SEK)

Tags: Lie Nielsen Bevel Edge Chisel 5/8 inch, 1-C-B-5-8, Lie-Nielsen chisels