Hello and welcome!

On 1 July 2021 there will be an EU regulation on what VAT you have to pay when buying online.

In order for you to see the correct VAT, we have automatically retrieved information about which country you are in. Please change it if it was wrong. This information is only used to show the correct VAT on the products.

The correct VAT will automatically be shown at the checkout regardless of the country you choose here.

We have used your IP number (3.236.214.224) for this check.

Country:


No. 7 Jointer Plane, Lie Nielsen



Our most popular jointer. 22" (55.9cm) long, with a 2-3/8" (6cm) x .140" (3.55mm) thick Tool Steel blade. Ground flat, within .001" (.0254mm) over the full length, and square within .001" . Bronze frog and cap. 8¼ lbs.
Unlike Bailey pattern planes, the frogs of bedrocks have a full contact area with the body and can be adjusted fore and aft without the need to remove the irons. Simply loosen the two locking screws on either side at the back of the frog, adjust the central screw to set your desired mouth opening and then nip up the side screws again. This system is easier, faster, more accurate and less likely to damage the cutting edge.
 

Write a review

Note: HTML is not translated!
    Bad           Good

No. 7 Jointer Plane, Lie Nielsen

  • 5,081.25kr (SEK)

  • Ex Tax: 4,065.00kr (SEK)

Related Products

Lie Nielsen  No. 4-1/2, 5-1/2, 6 or 7 Bench Plane Blade

Lie Nielsen No. 4-1/2, 5-1/2, 6 or 7 Bench Plane Blade

Lie Nielsen  No. 4-1/2, 5-1/2, 6 or 7 Bench Plane Blade Our A-2 Tool Steel is cryogenical..

547.50kr (SEK) Ex Tax: 438.00kr (SEK)

Tags: No. 7 Jointer Plane, Lie Nielsen, 1-7, LN Bench Planes