Hello and welcome!

On 1 July 2021 there will be an EU regulation on what VAT you have to pay when buying online.

In order for you to see the correct VAT, we have automatically retrieved information about which country you are in. Change it if it was wrong or if you want to show the VAT of another country.

The correct VAT will be automatically shown at the checkout regardless of which country you choose here.

We have used your IP number (3.235.179.79) or if you have approved location services, to find the information. This information is only used to show the correct VAT on the products and is then used at checkout.

Country:


  • Super-Hard Milled Scrapers from Veritas

Super-Hard Milled Scrapers from Veritas

Most cabinet scrapers are sheared from spring steel, hardened to Rc38-42. These scrapers are harder (Rc48-52) and hold an edge longer. The edges are carefully milled to a square, sharp 90° ready for immediate use on fine work. For heavy-duty use, a hook must be burnished onto them. The prepared edges not only save you the initial effort of filing and stoning, but indicate the condition they should be in the next time you intend to put a hook on them.

The scrapers come in four thicknesses. The two thinnest, used for fine work, are 2" x 6" (50mm x 150mm). The two thicker ones are 2-3/8" x 6" (60mm x 150mm) and are for heavier stock removal, the 1mm scraper being suitable for paint removal. All come with edge guards and complete resharpening instructions.

Available individually or as a set of four.

 

 

Write a review

Note: HTML is not translated!
    Bad           Good

Super-Hard Milled Scrapers from Veritas

  • Brand: Veritas tools
  • Product Code: 05K30.10
  • Availability: In Stock
  • 237.50kr (SEK)

  • Ex Tax: 190.00kr (SEK)

Tags: super-hard milled scrapers from veritas, 05k30.10, veritas tools, scrapers and scrapertools