• SVS-50 Multi Jig

It is not without reason this jig is named "Multi Jig". It consists of a housing and two interchangeable seats for different types of tools, the open seat and the closed seat, which really makes it two jigs in one. 

With SVS-50 you can sharpen square and skew turning chisels with straight or curved edges as well as parting tools, roughing gouges and gouges and chisels for woodcarving.

Svs 50 3 1276X956

The closed seat

For square and skew chisels

The closed seat has been developed for the precision sharpening of square and skew chisels for woodturning and woodcarving. Since the chisel is mounted in the centre of the seat, you only need to mount the tool once for grinding both bevels. When one side is ready, you simply turn the jig upside down and sharpen the other side until they are symmetrical.

Thanks to a unique and patented design, the jig also copes with oval section skews. The jig aligns the skew so that it is parallel with the universal support and you can sharpen both straight and curved edges. Max width of skews 32 mm (1¼").

Svs 50 2 1276X956

The open seat

For roughing gouges, parting tools and wide carving gouges 

The open seat, where the tool is fixed with a top screw, is used for tools which have the edge ground square across the shank, such as parting and beading tools, roughing gouges and wide carving gouges up to 50 mm (2") wide. The seats are mounted with a bottom screw, which also enable you to choose the skew angle.

 

 

Sharpening woodturning tools

SVS-50 together with the Turning Tool Setter

For sharpening woodturning tools, we highly recommend you to use the SVS-50 jig together with the TTS-100 Turning Tool Setter. That way you can exactly replicate the shape and edge angle over and over again. Also, it will save you time since you only remove a minimum amount of steel at each sharpening.

Wet grinding on your Tormek gives you a very sharp edge that will last much longer. A really sharp gouge cuts easily and you will notice it gives the wood a very fine surface, often there is no need for sanding.

Using SVS-50 on a bench grinder

For woodturning tools, if you have a new tool and need to remove a lot of steel in order to change a profile, you can with the mounting set BGM-100 also use SVS-50 on a bench grinder. But here you need to pay attention so that you do not burn the edge. After the initial rough shaping on a bench grinder, keep the tool in the jig and move over to the Tormek machine to give the edge the final sharpness.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

SVS-50 Multi Jig

  • Brand: Tormek
  • Product Code: SVS-50
  • Availability: In Stock
  • 496.15kr (SEK)

  • Ex Tax: 396.92kr (SEK)

Related Products

AWT-250 Advanced  Water Trough
Model: AWT-250

AWT-250 Advanced Water Trough

The Advanced Water Trough AWT-250 has an enlarged standard lip which ensures that your workbench sta..

203.13kr (SEK) Ex Tax: 162.50kr (SEK)

SVA-170 Axe Jig
Model: SVA-170

SVA-170 Axe Jig

With the Tormek Axe Jig SVA-170 you will be surprised to see how sharp you can get an axe. The jig f..

106.06kr (SEK) Ex Tax: 84.85kr (SEK)

SVD-110 Tool Rest
Model: SVD-110

SVD-110 Tool Rest

With the Tool Rest you get an extended support surface from the Universal Support. It is ideal for s..

248.02kr (SEK) Ex Tax: 198.41kr (SEK)

SVX-150 Scissors Jig
Model: SVX-150

SVX-150 Scissors Jig

Give your scissors a bite on the Tormek with the SVX-150 jig for scissors. It fits all sorts of scis..

379.81kr (SEK) Ex Tax: 303.85kr (SEK)

SG-250 Tormek Original Grindstone
Model: SG-250

SG-250 Tormek Original Grindstone

The Tormek Original Grindstone has evolved over the years to offer the best combination of..

1,234.15kr (SEK) Ex Tax: 987.32kr (SEK)

Tags: SVS-50 Multi Jig, SVS-50, Tormek - sharpening