Hello and welcome!

On 1 July 2021 there will be an EU regulation on what VAT you have to pay when buying online.

In order for you to see the correct VAT, we have automatically retrieved information about which country you are in. Please change it if it was wrong. This information is only used to show the correct VAT on the products.

The correct VAT will automatically be shown at the checkout regardless of the country you choose here.

We have used your IP number (3.80.5.103) for this check.

Country:


Veritas hyvelstål och ersättningshyvlestål

Veritas hyvelstål och ersättningshyvlestål

Ersättnings hyvelstål för äldre hyvlar.

Dessa hyvelstål är tillverkade i A2 eller 01 specialstål för bästa hyvelresultat. Våra ersättnings hyvelstål är 2,4mm (3/32") tjocka, dvs. nästan 20% tjockare än vad som är standard. Denna grövre tjockleg förbättrar hyvelresultatet betydligt och ger ett högklassigt resultat.

Dom är alla 178mm (7") långa och har en 30°eggvinkel och passar dom flesta äldre hyvlar såsom Stanley, Record, Memo, Jernbolaget, mfl. i resp. hyvelstorlek.

Pågrund av att denna typ av hyvlar har tillverkats (hyvlar i stål) under mer än 100 år så finns det avvikelser som skett i mått under dessa år, så ibland får man modifiera sin hyvle lite för att ett ersättings hyvelstål ska passa.

Hyvelstål för stöthyvlar är (1/8") tjocka med en eggvinkel om 25° .Spår för justering finns såklart som passar i justerings mekanismen för dessa hyvlar.

Du hittar rätt hyvelstål genom att mäta dess bredd, det är antingen 1-3/8" (low-angle, 60-1/2 typ) eller 1-5/8" (standard 9-1/2 typ).

Dom Brittisk tillverkade Record och Stanley har ett sidojustering spår som är 5/8"   och har tre spår för denna justering. Hyvlar utan denna justerings funktion ska ha 7/16 spår Äldre amerikanska Stanley stöt hyvlar har 8 spår.

 


Category

Optional A2 Blade, 1-5/8", 50° Bevel

Optional A2 Blade, 1-5/8", 50° Bevel

Blade is 1-5/8" wide, 1/8" thick, made of either A2 or O1 tool steel and lapped on non-bevel side to..

333.43kr (SEK) Ex Tax: 266.74kr (SEK)

1-1/16" Rabbet Blade for Combination Plane

1-1/16" Rabbet Blade for Combination Plane

Rabbet Blade for Combination PlaneSuitable for use only with our combination plane, our 1-1/16" wide..

202.50kr (SEK) Ex Tax: 162.00kr (SEK)

1/2 inch Fluting Blades for Veritas® Combination Plane

1/2 inch Fluting Blades for Veritas® Combination Plane

For use with our combination plane, these blades are used to create decorative concave fluting on wo..

180.50kr (SEK) Ex Tax: 144.40kr (SEK)

1/2 inch Large Bead Blade

1/2 inch Large Bead Blade

The large blades, for use only with our combination planeCut a 1/16" groove on either side of the bl..

236.31kr (SEK) Ex Tax: 189.05kr (SEK)

1/4 inch Fluting Blades for Veritas® Combination Plane

1/4 inch Fluting Blades for Veritas® Combination Plane

For use with our combination plane, these blades are used to create decorative concave fluting on wo..

232.50kr (SEK) Ex Tax: 186.00kr (SEK)

1/4 inch Tongue-Cutting Blades for Veritas® Small Plow Plane

1/4 inch Tongue-Cutting Blades for Veritas® Small Plow Plane

Tongue-Cutting Blades for Veritas® Small Plow Plane     ..

296.25kr (SEK) Ex Tax: 237.00kr (SEK)

1/4" Three-Reed Blade Beading Blades for Veritas® Small Plow Plane or Combination Plane

1/4" Three-Reed Blade Beading Blades for Veritas® Small Plow Plane or Combination Plane

For use with our combination plane, our PM-V11® steel reeding blades are available in two-, three- a..

262.50kr (SEK) Ex Tax: 210.00kr (SEK)

1/4" Two-Reed Blade Beading Blades for Veritas® Small Plow Plane or Combination Plane

1/4" Two-Reed Blade Beading Blades for Veritas® Small Plow Plane or Combination Plane

For use with our combination plane, our PM-V11® steel reeding blades are available in two-, three- a..

242.50kr (SEK) Ex Tax: 194.00kr (SEK)

1/8 inch Tongue-Cutting Blades for Veritas® Small Plow Plane

1/8 inch Tongue-Cutting Blades for Veritas® Small Plow Plane

Tongue-Cutting Blades for Veritas® Small Plow Plane     ..

235.00kr (SEK) Ex Tax: 188.00kr (SEK)

1/8" Four-Reed Blade Beading Blades for Veritas® Small Plow Plane or Combination Plane

1/8" Four-Reed Blade Beading Blades for Veritas® Small Plow Plane or Combination Plane

For use with our combination plane, our PM-V11® steel reeding blades are available in two-, three- a..

262.70kr (SEK) Ex Tax: 210.16kr (SEK)

1/8" Three-Reed Blade Beading Blades for Veritas® Small Plow Plane or Combination Plane

1/8" Three-Reed Blade Beading Blades for Veritas® Small Plow Plane or Combination Plane

For use with our combination plane, our PM-V11® steel reeding blades are available in two-, three- a..

242.50kr (SEK) Ex Tax: 194.00kr (SEK)

1/8" Two-Reed Blade Beading Blades for Veritas® Small Plow Plane or Combination Plane

1/8" Two-Reed Blade Beading Blades for Veritas® Small Plow Plane or Combination Plane

For use with our combination plane, our PM-V11® steel reeding blades are available in two-, three- a..

223.12kr (SEK) Ex Tax: 178.49kr (SEK)

2-3/8" PM-V11 Blade, #4½ & #6

2-3/8" PM-V11 Blade, #4½ & #6

Replacement PMV-11® Blade, 2-3/8"..

661.25kr (SEK) Ex Tax: 529.00kr (SEK)

2" PM-V11 Blade,  #4, #5-¼ Bench Planes

2" PM-V11 Blade, #4, #5-¼ Bench Planes

Replacement PMV-11 Blade, 2" for Veritas #4 and #5 1/4..

623.75kr (SEK) Ex Tax: 499.00kr (SEK)

25°, O1 Blade for 2-1/4 Bevel-Up Bench Planes

25°, O1 Blade for 2-1/4 Bevel-Up Bench Planes

Replacement O1 Blade, 2-1/4", 25° Bevel..

478.75kr (SEK) Ex Tax: 383.00kr (SEK)

Showing 1 to 15 of 83 (6 Pages)