Trend Router Cutter

Trend Router Cutter

Bearing guided 3 degrees undercut 50mm cut  - shank 1/2

Bearing guided 3 degrees undercut 50mm cut - shank 1/2

3 degree undercut router bit with shank mounted bearing guide for routing a leading edge on doors to..

1,085.00kr (SEK) Ex Tax: 868.00kr (SEK)

Biscuit jointer set - shank 1/2

Biscuit jointer set - shank 1/2

Trend Craft Pro 1/2in shank bearing guided biscuit cutter - 37.2mm diameter Two Flute Carbide tips.T..

637.50kr (SEK) Ex Tax: 510.00kr (SEK)

Biscuit jointer set - shank 1/4

Biscuit jointer set - shank 1/4

Trend Craft Pro 1/4in shank bearing guided biscuit cutter - 37.2mm diameter Two Flute Carbide tips.T..

637.50kr (SEK) Ex Tax: 510.00kr (SEK)

Biscuit jointer set - shank 12 mm

Biscuit jointer set - shank 12 mm

This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing.The..

637.50kr (SEK) Ex Tax: 510.00kr (SEK)

Cove radius 6.35mm x 19mm cut  - shank 1/2

Cove radius 6.35mm x 19mm cut - shank 1/2

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and bo..

471.25kr (SEK) Ex Tax: 377.00kr (SEK)

Dovetail 6.0mm diameter x 98 degrees two flute - shank 8 mm

Dovetail 6.0mm diameter x 98 degrees two flute - shank 8 mm

These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A ca..

277.50kr (SEK) Ex Tax: 222.00kr (SEK)

Guided trimmer 6.35mm diameter x 25.4mm  - shank 1/4

Guided trimmer 6.35mm diameter x 25.4mm - shank 1/4

Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 6.3mm diameter Two Flute Carbide ..

255.00kr (SEK) Ex Tax: 204.00kr (SEK)

Intumescent cutter 10mm x 24mm  - shank 1/4

Intumescent cutter 10mm x 24mm - shank 1/4

Trend Craft Pro 1/4in shank Intumescent strip cutter - 10mm width Two Flute Carbide tips.Cuts the pe..

500.00kr (SEK) Ex Tax: 400.00kr (SEK)

Intumescent cutter 15mm x 24mm  - shank 1/4

Intumescent cutter 15mm x 24mm - shank 1/4

Trend Craft Pro 1/4in shank Intumescent strip cutter - 15mm width Two Flute Carbide tips.Cuts the pe..

525.00kr (SEK) Ex Tax: 420.00kr (SEK)

Kitchen Fitters Pack Two

Kitchen Fitters Pack Two

..

984.50kr (SEK) Ex Tax: 787.60kr (SEK)

Radius 2.4mm radius x 4.8mm diameter  - shank 1/4

Radius 2.4mm radius x 4.8mm diameter - shank 1/4

These are ideal for engraving and decorative panel work. Made with Solid Tungsten Carbide inserts, ..

267.50kr (SEK) Ex Tax: 214.00kr (SEK)

Radius 6mm radius x 19mm cut x 86mm  - shank 1/2

Radius 6mm radius x 19mm cut x 86mm - shank 1/2

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and bo..

455.00kr (SEK) Ex Tax: 364.00kr (SEK)

Radius 9.5mm radius x 19.1mm diameter  - shank 8 mm

Radius 9.5mm radius x 19.1mm diameter - shank 8 mm

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and bo..

437.50kr (SEK) Ex Tax: 350.00kr (SEK)

Radius 9.5mm radius x 32mm cut x 80mm  - shank 1/2

Radius 9.5mm radius x 32mm cut x 80mm - shank 1/2

Trend Craft Pro 1/2in shank 9.5mm radius cove cutter Two Flute Carbide tips.Two flute carbide TCT ti..

522.50kr (SEK) Ex Tax: 418.00kr (SEK)

Rounding over 3.2mm radius x 9.5mm cut  - shank 1/4

Rounding over 3.2mm radius x 9.5mm cut - shank 1/4

Trend Craft Pro 1/4in shank bearing guided round over router cutter - 1/8in radius Two Flute Carbide..

425.00kr (SEK) Ex Tax: 340.00kr (SEK)

Showing 1 to 15 of 29 (2 Pages)