The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers.
Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base.
Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch.
Instructions for fitting
The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10mm up to 30mm (GB10 - GB32). For larger diameter cutters a 40mm guide bush (GB40) is available.

Write a review

Note: HTML is not translated!
    Bad           Good

Trend UNIBASE - Router base adaptor

  • Brand: Trend UK
  • Product Code: UNIBASE
  • Availability: Pre-order
  • 313.75kr (SEK)

  • Ex Tax: 251.00kr (SEK)

Tags: Trend UNIBASE - Router base adaptor, UNIBASE, Universal Sub-base