Hello and welcome!

On 1 July 2021 there will be an EU regulation on what VAT you have to pay when buying online.

In order for you to see the correct VAT, we have automatically retrieved information about which country you are in. Please change it if it was wrong. This information is only used to show the correct VAT on the products.

The correct VAT will automatically be shown at the checkout regardless of the country you choose here.

We have used your IP number ( for this check.


This is essentially a low-profile bench dog with a quick-release sliding jaw for holding work. Dubbed a "blade" due to its flat design, it projects just 1/4" above a work surface to permit maximum access to a workpiece. Used much like a toggle clamp, it has a thumb-operated eccentric cam lever to control the sliding jaw, so you can quickly secure or release work.

With 1/4" range of travel, the jaw has limited throw, but applies up to 300 lb of clamping force. Flats on the cam provide secure stops at 1/8" and 1/4" of travel. The 1-1/2" x 1/4" jaw face has a 5° inward cant to help hold wood securely. The cam and jaw are cast steel, heat-treated for surface hardness, and the post and wedge-lock mechanism are turned steel.

The standard post version is for use in a through-hole or a blind hole that is at least 1-7/8" deep.

Write a review

Note: HTML is not translated!
    Bad           Good

Veritas® Bench Blade, 3/4" Standard Post

  • Brand: Veritas tools
  • Product Code: 05G22.10
  • Availability: In Stock
  • 197.50kr (SEK)

  • Ex Tax: 158.00kr (SEK)

Tags: Veritas® Bench Blade, 3/4 Standard Post, 05G22.10, Accessories - benchdogs