Hello and welcome!

On 1 July 2021 there will be an EU regulation on what VAT you have to pay when buying online.

In order for you to see the correct VAT, we have automatically retrieved information about which country you are in. Change it if it was wrong or if you want to show the VAT of another country.

The correct VAT will be automatically shown at the checkout regardless of which country you choose here.

We have used your IP number (3.235.179.79) or if you have approved location services, to find the information. This information is only used to show the correct VAT on the products and is then used at checkout.

Country:


Veritas® String Inlay Tool System

 

Used much like a marking gauge, this inlay tool lets you accurately cut narrow grooves in a workpiece as well as neatly slice fine strings from a sheet of veneer. Its interchangeable blade system lets you quickly swap blades to suit the activity.

The hook-shaped blade is designed to cut grooves. Used in a sweeping push-pull motion, it has outlining spurs on one side of the blade to score the groove edges, and a cutting edge on the other to remove material. The result is a very clean, defined groove with no tear-out.

To slice strings of consistent width, the bevel-edged, spear-point blade is used for cutting in either direction. The blades can be offset up to 3-1/4" from the brass fence (or up to 9-1/4" with the optional 10" guide rods). Posts projecting from the fence let you pivot the blade into the work when starting a cut, and also serve as limiters to control cut depth (you can remove the posts to attach a custom radiused wooden sub-fence when working with a curved-edge workpiece).

By replacing the cutter head with the optional pencil holder, you can draw a design on your work exactly as it will be cut. In addition to providing a line to follow with the cutter, it serves as a dry run to preview how the design will look on your workpiece. The optional compass center, used in lieu of the fence, lets the cutter head or pencil holder make circles and arcs with radii from 3/4" to 3-3/4" (up to 9-3/4" with the 10" rods). While not strictly required, using a pin awl (available separately) to define the center mark for the compass head makes it easy to position the compass on the workpiece.

 

Write a review

Note: HTML is not translated!
    Bad           Good

Veritas® String Inlay Tool System

  • Brand: Veritas tools
  • Product Code: 05K11.01
  • Availability: In Stock
  • 971.25kr (SEK)

  • Ex Tax: 777.00kr (SEK)

Tags: veritas® string inlay tool system, 05k11.01, veritas tools, inlay and veneering tools