Bestselling Products

Low Angle Block Plane in bronze
Model: 1-102

Low Angle Block Plane in bronze

Low Angle Block Plane in bronze   These small bronze planes fit perfectly in the hand and ...

1,425.83kr (SEK) Ex Tax: 1,140.66kr (SEK)

PINNED COPING REG 6.5" - 18TPI 0.50 x 2.40
Model: 90.551

PINNED COPING REG 6.5" - 18TPI 0.50 x 2.40

For use in hand frames that require pinned-end blades. Will cut a broad range of materials including...

56.71kr (SEK) Ex Tax: 45.36kr (SEK)

Veritas® T-Slot Tracks (1/4-20 Thread) 600mm long
Model: 12K79.22

Veritas® T-Slot Tracks (1/4-20 Thread) 600mm long

Veritas® T-Slot Tracks (1/4-20 Thread)Veritas aluminum extrusions are among the most useful compo...

131.13kr (SEK) Ex Tax: 104.90kr (SEK)

Veritas® Mk II honing guide - slipjigg
Model: 05M09.01

Veritas® Mk II honing guide - slipjigg

Delivers repeatable, consistent, fast honing. Integral blade registrati...

609.62kr (SEK) Ex Tax: 487.70kr (SEK)

Veritas® Dual Marking Gauge
Model: 05N70.01

Veritas® Dual Marking Gauge

Veritas® Dual Marking Gauge Product Highlights: Set two measurements at...

526.81kr (SEK) Ex Tax: 421.45kr (SEK)

Carving knife SLOYD
Model: 822001

Carving knife SLOYD

Cutting edge:This carving Sloyd knife (Sloyd being the Swedish name for Craft) is designed specifica...

278.14kr (SEK) Ex Tax: 222.51kr (SEK)

Parallel clamp
Model: EH-PJ60P

Parallel clamp

Parallel clamp Parallel jaw faces with extra-large contact surfaces The Anti-Slip System is ...

187.83kr (SEK) Ex Tax: 150.26kr (SEK)

Incra 0,5 mm Pencil
Model: IRPENCIL

Incra 0,5 mm Pencil

INCRA 0.5mm pencils mark the work perfectly without worry of parallax or angle slip. Pencil design m...

24.12kr (SEK) Ex Tax: 19.30kr (SEK)

Veritas® Micro Adjust Marking Gauge plain rod
Model: 05N35.10

Veritas® Micro Adjust Marking Gauge plain rod

There are two main problems with a typical marking gauge: you have to tilt it just right to avoid pi...

405.53kr (SEK) Ex Tax: 324.42kr (SEK)

Parallellclamps - 95mm deep
Model: EH-PJH80

Parallellclamps - 95mm deep

Parallellclamps Parallel Jaw : Large parallel clamping surfaces Forged sliding arm inside (medium...

490.47kr (SEK) Ex Tax: 392.38kr (SEK)

Incra 36" T-Track Regular 915 mm
Model: TTrackREG36

Incra 36" T-Track Regular 915 mm

T-tracks är en mångsidig produkt med flera bra användningsområden för att underlätta arbetet m...

189.12kr (SEK) Ex Tax: 151.29kr (SEK)

Super-Hard Milled Scrapers from Veritas
Model: 05K30.10

Super-Hard Milled Scrapers from Veritas

Super-Hard Milled Scrapers from Veritas Most cabinet scrapers are sheared from spring steel, har...

217.02kr (SEK) Ex Tax: 173.61kr (SEK)

Low Angle Adjustable Mouth Block Plane 12 degree angla
Model: 1-60-1-2

Low Angle Adjustable Mouth Block Plane 12 degree angla

Low Angle Adjustable Mouth Block Plane 12 degree angla These Iron Block Planes are 6¼" long wit...

2,045.75kr (SEK) Ex Tax: 1,636.60kr (SEK)

Glubot 4,7dl glue bottle
Model: GB.GLUBOT

Glubot 4,7dl glue bottle

Glubot 4,7dl glue bottle The GlüBot is designed with a 2-chamber system that pushes glue from th...

91.94kr (SEK) Ex Tax: 73.55kr (SEK)

Incra T-Rule 300mm
Model: TRUL300M

Incra T-Rule 300mm

(Alla Incras produkter vi säljer är anpassade för den europeiska marknaden, och har måttangivels...

399.62kr (SEK) Ex Tax: 319.70kr (SEK)

Hidden Hinge Pin 3mm
Model: 05H02.01

Hidden Hinge Pin 3mm

Hidden Hinge Pin 3mm Not only are these pin hinges sturdy and nearly invisible when in place, they ...

38.00kr (SEK) Ex Tax: 30.40kr (SEK)

Veritas® Workshop Striking Knife
Model: 05D20.05

Veritas® Workshop Striking Knife

Like pencils, there never seems to be a striking knife at hand when you need it. We've produced this...

218.50kr (SEK) Ex Tax: 174.80kr (SEK)

The Solution at Hand
Model: LAP-SAH

The Solution at Hand

By Robert WearingBecoming proficient at handwork isn’t just about muscle memory and learning to sh...

245.88kr (SEK) Ex Tax: 231.96kr (SEK)

Veritas® T-Slot Tracks (1/4-20 Thread), 900mm
Model: 12K79.24

Veritas® T-Slot Tracks (1/4-20 Thread), 900mm

Veritas® T-Slot Tracks (1/4-20 Thread)Veritas aluminum extrusions are among the most useful compon...

155.42kr (SEK) Ex Tax: 124.34kr (SEK)

Sliding combination square 150mm
Model: CS150

Sliding combination square 150mm

Sliding combination square, metric and imperial marking on rulerCan mark 90° and 45°Adjustable dep...

164.29kr (SEK) Ex Tax: 131.43kr (SEK)

Showing 1 to 20 of 200 (10 Pages)